Announcement

Collapse
No announcement yet.

Guide Lighting Data Reference

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Guide Lighting Data Reference

    Does anyone have a lead as to where I can find reference material / data for Guide lighting? Purchase, download, etc.
    William Edwards, AMCA #10035

    Attend the 2019 Southern National Meet at Denton Farmpark, NC, 17-18 May 2019
    http://www.amcasouthernnationalmeet.com/

  • #2
    Guide was a really large enterprise. They made lighting equipment for virtually every american OEM into about the early 70's. Is there something in particular you were pondering?
    Brian Howard AMCA#5866

    Comment


    • #3
      Thank you for your reply Brian. You are right. I should have been more specific by saying Guide numbering for Harleys. What I'm interested in is finding correct Guide spots for my 48 pan. I've noticed various Guide numbers for spots & markers listed on eBay and wondered is there guide/book which explains their numbering system. As an example, I've noticed a listing on eBay (item # 250359729632) and wondered if these are the correct spots for a 48 (they look correct according to Palmer's restoration book). This would be large investment only to find out they are not the right spots, thus my quandary!
      Ride safe,
      William Edwards, AMCA #10035
      William Edwards, AMCA #10035

      Attend the 2019 Southern National Meet at Denton Farmpark, NC, 17-18 May 2019
      http://www.amcasouthernnationalmeet.com/

      Comment


      • #4
        I thought 48 was the short mount and didn't have the focus screw. Bob
        AMCA #3149
        http://www.thegoodoldmotorcyclepartscompany.com

        Comment


        • #5
          I have a short mount. Didn't realize the screw on the back of the shell (on the ebay listing) was a focus adjustment (if that's what you mean?).
          William Edwards AMCA#10035
          William Edwards, AMCA #10035

          Attend the 2019 Southern National Meet at Denton Farmpark, NC, 17-18 May 2019
          http://www.amcasouthernnationalmeet.com/

          Comment


          • #6
            Yes. I don't no what year they stopped the screw but as far as I know it wasn't used in 48. The mounts on the e-bay listing are the long ones not short. Bob
            AMCA #3149
            http://www.thegoodoldmotorcyclepartscompany.com

            Comment


            • #7
              Thanks, Bob
              William Edwards, AMCA #10035

              Attend the 2019 Southern National Meet at Denton Farmpark, NC, 17-18 May 2019
              http://www.amcasouthernnationalmeet.com/

              Comment


              • #8
                According to the parts books the prefocused bulb socket (68679-49) is listed as late 49 and later and the 68679-38 bulb socket as 38- early 49. Spot buckets should have the guibe logo in between the riveted on brackets and the lines of script "GUIDE" & "S-H2" stamped in the one bracket, one above the other. They should also have toggles on the rear, at some point in the late 50's the toggles seem to have been eliminated.
                Brian Howard AMCA#5866

                Comment


                • #9
                  Ahh, then 68679-38 bulb socket would have a focus screw (68684-38) in the back of the bucket! Would you have any leads of any data reference (if any and where I could obtain/order + I like to collect this type of data) for Guide numbers? Thanks a million for your help, Brian!
                  William Edwards AMCA#10035
                  William Edwards, AMCA #10035

                  Attend the 2019 Southern National Meet at Denton Farmpark, NC, 17-18 May 2019
                  http://www.amcasouthernnationalmeet.com/

                  Comment


                  • #10
                    Brain you just made my day. Photos are of a short mount with out the focus screw.
                    Attached Files
                    Last edited by Robert Luland; 01-25-2009, 06:46 PM. Reason: photos
                    AMCA #3149
                    http://www.thegoodoldmotorcyclepartscompany.com

                    Comment


                    • #11
                      38-48 used tall mount with focus screw. 49 was one year only, tall mount with NO focus screw. 50 and up used short mount. There may have been some overlaps while the style changed but this will get you in the ballpark.

                      Comment


                      • #12
                        Thank you JWL
                        William AMCA# 10035
                        William Edwards, AMCA #10035

                        Attend the 2019 Southern National Meet at Denton Farmpark, NC, 17-18 May 2019
                        http://www.amcasouthernnationalmeet.com/

                        Comment


                        • #13
                          Since were all on this topic already, how about the lenses? I don't recall the clear lenses being marked. But what about the red or fog lenses? Also am I correct that only the fog lenses were fluted?
                          Brian Howard AMCA#5866

                          Comment


                          • #14
                            Heres the lens.
                            Attached Files
                            AMCA #3149
                            http://www.thegoodoldmotorcyclepartscompany.com

                            Comment


                            • #15
                              Better shot of lens. The system was screwed up yesteday.
                              Attached Files
                              AMCA #3149
                              http://www.thegoodoldmotorcyclepartscompany.com

                              Comment

                              Working...
                              X