Dual Ignition Point Circuit Breaker Stud Installation

[Iacovos]

Hello everyone

Trying to install the Condenser and the Ignition wires on a
the dual point circuit breaker studs. Both wires go underneath.

Which is the correct order they go on the stud?
condenser wire end
ignition wire eyelet
lock washer
nut

please see the pictures below

is this right? Got me confused






IMG_6792.jpeg


IMG_6793.jpeg

IMG_6794.jpeg

[dukekleman]

Lacovos,

That is the correct orientation.
When installed that way, each component compliments and supports one another properly.

Duke Kleman

[Iacovos]

THANKS SO MUCH dukekleman !!!