41 Indian Scout intake manifold nuts

[41indian]

Does anyone know what form of a 1-1/2" wrench will fit to take these nuts off. I am down to this task on my mini tear down and can't find a wrench to get these off and put the peek seals in.

any help is much appreciated.

[tomfiii]

Greer's carries this under scout listing tools.

[41indian]

Greer's carries this under scout listing tools.

I thought so too but they said they don't when I mailed them.

[T. Cotten]

42Indian!

I doubt Michael Breeding still produces the fine examples on top, but a set of late-model milwaukee shock adjusters accept silver-soldered woodruff keys and work exceptionally.
SSSPNNR.jpg
Good luck with mass-produced PEEK seals.

....Cotten

[41indian]

Thanks but these are 1-1/2 std hex nuts? I did manage to get a think service wrench on one but manual is it tight need to get something better to go around more of the flats....

[exeric]

I've bought a lot of rusty old wrenches at flea markets for next to nothing. Even if a wrench is a smaller size, they can be milled, filed, or ground. You might try ebay too. You may not use that wrench for 10 more years, but when you need it, you'll be glad you have it.

[T. Cotten]

41Indian!

Sorry; all I could see in your avatar was civvy paint, so I assumed it was a Sport Scout.
As Exeric points out, Even farm supply wrenches can be tailored:
MANWRNCH.jpg
.....Cotten