New source for ul cylinders

[moldthread]

We are proud to announce that Enfieldracing.com has completed the purchase of all the flathead casting patterns from S & S Cycles. This includes the UL cylinders, engine cases and cam cover, K/KR cylinders, Indian Scout and Chief Cylinders, and Henderson 4 cylinder. These are the same patterns used by Anders Nygren of Sweden, manufactured under the FLATHEAD POWER name. We expect to be in production of the UL cylinders by summer 2015, with the K & KR cylinders right after that, then the UL Engine cases which will be perfect for Magnum Engines.The cases will be cast in 356-T6 aluminum which is 40% stronger than what the factory used.

All parts will be cast and machined in the US in small lots to the same exacting standards that we have established for our existing parts.

This will greatly compliment our line of 648 Indian cases, cylinders, WL/WR/KR cams, heads and other race parts, as well as our Rubber Ducky Floats and Peek Intake Superseals.

Bruce Argetsinger
AHRMA Dirt Track # 67J
www.enfieldracing.com

[koanes]

Good on you Bruce. We can trust you to get the castings and machining right. Watching you detail patterns in between sales while vending at Denton, I know you are a detail guy.

[exeric]

I've always admired your work Bruce, and I know you will offer a high quality product.

[DeeDay]

So an I reading this correctly?...
You will be producing cases, cylinders, and other parts for the Henderson 4???

I would be very interested in knowing more.
Thanks.
DeeDay

[moldthread]

All I got of the Henderson was the cylinder patterns.
no others.
I do not anticipate making any since they are available elswhere.

Bruce Argetsinger
AHRMA Dirt Track # 67J
www.enfieldracing.com

[Cnocha]

Bruce,
Will you be producing early Chief cylinders? 1935-39? Thanks, Chris

[moldthread]

Hi Chris,

The patterns are for the later chief.
I probably will not do them because as with the Henderson, there are already others making them and the total market is too small to support multiple suppliers.
At this time I think I will stick to the parts which nobody else is making. The UL & K model H-D

Bruce Argetsinger
AHRMA Dirt Track # 67J
www.enfieldracing.com

[Frankenstein]

Hey Bruce, Congrats, will be looking forward to seeing the new parts. I'll spread the word.
Dick

[tfburke3]

Hi Chris,

The patterns are for the later chief.
I probably will not do them because as with the Henderson, there are already others making them and the total market is too small to support multiple suppliers.
At this time I think I will stick to the parts which nobody else is making. The UL & K model H-D

Bruce Argetsinger
AHRMA Dirt Track # 67J
www.enfieldracing.com

I am not aware of anyone reproducing Indian Chief cylinders 35-37 or 38-39.If there is who?
Thanks
Tom