Can anyone I.D. these bits please?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Tommo
    Senior Member
    • Sep 2001
    • 1318
    #1

    Can anyone I.D. these bits please?

    The bits in the attached photos were saved from a scrap bin and when I got them they were hanging all together on a wire.
    I don't know if they all belong to one assembly or if they have come from several different ones.
    Once cleaned up they seem in pretty good condition but I don't have a clue as to what they fit.
    Any ideas, anyone.
    Attached Files
    Peter Thomson, a.k.a. Tommo
    A.M.C.A. # 2777
    Palmerston North, New Zealand.
    Tags: None
    • Tom Wilcock
      Senior Member
      • Jan 2008
      • 330
      #2
      Tommo: I believe the parts may be for an early Indian roller drive. Around 1908, Indian used a roller drive from the engine to the countershaft because the engine ran backwards. Tom Wilcock, AMCA 381

        Comment

        • Tommo
          Senior Member
          • Sep 2001
          • 1318
          #3
          Tom,
          Thanks for that as I was beginning to think that maybe I should hae left them in the bin.
          Are they of any use to anyone out there?
          Peter Thomson, a.k.a. Tommo
          A.M.C.A. # 2777
          Palmerston North, New Zealand.

            Comment

            • Tom Wilcock
              Senior Member
              • Jan 2008
              • 330
              #4
              Tommo: I checked with a friend who has a 1908 Indian and he says these parts are not Indian. Tom

                Comment

                Previous template Next
                Working...