Wanted: intake manifold for 101 engine

[Ken]

Wanted: I am looking for an intake manifold for a 1929 37 inch 101 engine. Please email Ken at panhead.matz742@gmail.com

[pisten-bully]

http://www.oldtimerservice.net.pl/pa...ld-with-cones/

37c.i. Scouts were more of an exported machine so the motor parts are easier to find in Europe or Australia!

[Ken]

Thanks for the info. Have a nice day, Ken

[exeric]

When searching for a part, it helps to post a picture of the part. A lot of people have piles of parts that they can't identify but if they see a good picture it could help both hunter, and hoarder.

[pisten-bully]

Ken, dawned on me that the manifold for a 741 might be the same, and if so Greer's will have it!

[T. Cotten]

Ken, dawned on me that the manifold for a 741 might be the same, and if so Greer's will have it!

Don't think so, Harry!

I have reconditioned my share of both with PEEK seals, and they are not the same.

(My notes are not at hand,... )

....Cotten

[pisten-bully]

Don't think so,

Cotten, I only said that because there is a vendor or three listing the 741 Indian manifold and the 37 c.i. Scout manifold as being the same. The lion's share of 101 Scouts around are 750cc and would have a different manifold.

[T. Cotten]

Because my memory is so bad, Harry,..

I take notes;
Unfortunately, I have forgotten how to decipher them.

But I have reconditioned all three kinds of manifolds, with different nut sizes, and different internal bevels within the nuts.

When they cross my benches, I treat each one like its the only one.
If it bolts up (and seals) for the owner, it must be the right one!

....Cotten