super x

[bronco]

what are the super x rebuilders using for pistons with stock compression hieght thanks.

[RichO]

I used Studebaker pistons. Late 40's early 50's. Several motors.

[gharper]

What model Super X are you working on bronco? Not many of them coming together these days.

[bronco]

re super x..020 over stock 3 inch bore standard 1927 model a46..either cam ground or solid skirt.thanks for interest.

[RichO]

Studebaker are standard at 3" and cam ground with oversizes.

[RichO]

It's been about 35 years since I built several motors but I believe the deck height and pin size where correct also.