Announcement

Collapse
No announcement yet.

Wheel ID Help

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Wheel ID Help

    Saw this on the AACA car forum. A man is seeking an ID for a wheel he has which appears to be motorcycle. Figured I'd post here incase it just happens to be something rare and someone needs it. Don't know the guy and not sure if he wants to sell but he might as he likely has no use for it. If anyone interested I can get you connected to owner.

    "I was told this is a motorcycle wheel but have so far been unable to identify it. It is 20 inches in diameter and looks like if probably takes a 19 inch tire. The rim is beaded edge. The ID of the the hub is approximately 2-1/2 inches diameter. One side of the hub has an internal spline. There are 40 spokes. If anyone can help identify it I would appreciate it."
    Attached Files
    Last edited by Skirted; 11-21-2017, 11:37 AM.
    Jason Zerbini
    #21594
    Near Pittsburgh PA (Farm Country)
    Allegheny Mountain Chapter http://amcaamc.com/
    Tags: None
  • #2
    Originally posted by Skirted View Post
    Saw this on the AACA car forum. A man is seeking an ID for a wheel he has which appears to be motorcycle. Figured I'd post here incase it just happens to be something rare and someone needs it.

    "I was told this is a motorcycle wheel but have so far been unable to identify it. It is 20 inches in diameter and looks like if probably takes a 19 inch tire. The rim is beaded edge. The ID of the the hub is approximately 2-1/2 inches diameter. One side of the hub has an internal spline. There are 40 spokes. If anyone can help identify it I would appreciate it."
    19 in. (V) model harley 30 to 36

    Comment

    • #3
      Thank you vride5 for the info. Will pass it on.
      Jason Zerbini
      #21594
      Near Pittsburgh PA (Farm Country)
      Allegheny Mountain Chapter http://amcaamc.com/

      Comment

      • #4
        18' wheels for the later VL also....
        Louie
        FaceBook >>>Modern Antique Cycle
        Blog Site >>> http://louiemcman.blogspot.com/
        YouTube >>> LouieMCman

        Comment

        • #5
          That looks like a short spline VL hub to me but I could be wrong. If it is short then it would be 30-32 or33 and if it is long it would be 34-36. Need to see or measure the length of the splines to be sure but for sure VL.

          Tom (Rollo) Hardy
          AMCA #12766

          Comment

          Previous template Next
          Working...
          X