Linkert fuel fitting.

[vph-d]

Would someone please post the thread fitting size of a Linkert fuel fitting? What I'm after is a 90 degree fitting for the fuel inlet to ease crowding in that area on a BTSV foot shift Bobber project.
VPH-D

[T. Cotten]

VPH-D!

If you mean the float valve itself, it is 7/16"-27 tpi.
Many Indians used 1/8" npt, and it would be much easier to find an elbow to fit. If you are careful, the straight thread can be chased to a taper with a die, as they are both the same pitch.

.....Cotten

[Rubone]

WR and KR used a factory 90 degree elbow. They are regularly on eBay.

[vph-d]

Thanks guys, the WR part looks good for the job.
VPH-D