HD Ignition switch rebuilder/ suppluer

[Chuck#1848]

I am looking for a good source for a ignition switch for my 57 pan head, I looked at v-twin and other suppliers but for their cost thinking I may want to go with the real thing.
My bike didn't come with one, So who out there sells and does the real switches?

Thanks in advance

[upsrod]

Chuck, I have the correct switch for your '57 without the tumblers...PM me if you are interested.

[exeric]

Don't forget our fellow member Terry Marsh. He sells, and rebuilds those switches to an high, correct standard.

[hennigan62]

Agreed Terry marsh has rebuilt my 62 fl and my wife's 73 sevi car. Did a great job.

[diesel55]

Hello Chuck Terry Marsh

[Chuck#1848]

Thanks everyone, I was told Terry is the person to see a couple weeks ago just forgot his name.

Terry if you are reading this I sent you a PM thanks again all

[Coolbreeze]

Terry,
I sent a message to you asking if you are the "go-to-guy" for a repair to the ignition switch on my H-D KHK. I hope you are.
George

[marsh1915hd]

HI George,
I don't do KHK switches. There are none.

[23JDCA 808]

I did a google search; these folks may have a new switch. I know nothing about these bikes.

http://www.jpcycles.com/harley-switches?utm_source=google&utm_medium=cpc&utm_term=harley%20switch&utm_campaign=electrical+and+batteries&device=c&network=g&matchtype=b&gclid=CJr11_2FysACFQGVfgodKTwA_w

[Coolbreeze]

Thank you. J&P Cycles catalogue was the first place I looked, but they had nothing I could use. As it turns out, my irreplaceable switch may be OK - as is my battery. I found a short in my system and fixed it. Whew!