Help me identify this seat tee.

[Robert Luland]

Well guys, I need your help. Got this rare seat tee. How rare? That's a good question. Bought this thinking it was big twin but according to Bruce Palmer's bible I am wrong. It measures 11.1/4" from the pivot hole to the clevis hole which according to Bruce is for 45. This tee has a grease fitting on top but a 5/16" pivot hole (No bushing). It also has the one position only casting. The casting number is RE-39T. I have never seen this one before. Anyone got a clue? Thanks, Bob L

[pete reeves]

RL ?

Pete Reeves

[Rubone]

Yup, it is DL/ RL. I have one just like it!

[Slojo]

1937 ... 45

joe

[Steve Slocombe]

I guess 1934 and up because it has the three holes each side for the full pan seat. Earlier would be two holes for the half pan seat.

[Robert Luland]

Thanks guys. Joe, Loyd Benson also said 37 45. Bob L

[Jerry Wieland]

I would guess 37 45" also. HD did not standardize the seat T between WL,RL,Dl, G and the big twins until 1938. Pre 1938 45's have a whole of array of different seat T's that were used.

Jerry

[Rubone]

Thanks guys!
So, if anyone needs it let me know as I sure don't!
Robbie