Indian Vertical Chum-Me Seat Hardware Kit

[JTR249]

If anyone has original Indian vertical Chum-Me seat hardware parts as shown in the two attached photos, reply or send a PM to me to discuss cost if you are willing to sell your spares.
I only need the two longest bolts shown and all fittings that are placed on them, though I can purchase the entire kit if necessary.
-JR
36450

[JTR249]

I just wanted to post a response if anyone needs a similar Chum-Me seat mounting kit. I don't think this one is in the books like the Warrior motor brace kit where all the hardware had part numbers and were listed in a parts update that Pete Sink, Brian Riegel, Tom Thomson, Roger Hensley and Wally Brown took part in. The photo is found in the book compiled by Pete Sink on parts updates on Verticals.
Jim Preussner of Southwest Vintage Cycles provided the long bolts. My apologies if I have incorrectly spelled anyone's first or last names. Pete Sink provided the reference photos, dimensions and feedback.
Anyway, Wally is at BMB Cycles down in North Carolina and he made the parts for my kit that I could not find. Note however that most people who use any type of mounting system do not usually use the longer bottom spacers. Don't know why.
-JR