Wanted - S&S bobweight or flywheel balancing kit

[T. Cotten]

....when I find the bobweight, ..

Beware, Erik,

A proper bobweight would have to be determined for each reciprocating mass.

If it comes in a box, its probably wrong.

(I found it easiest to just add weights to the rod ends with the crank assembled upon knife-edges, and a whole lot cheaper.)

....Cotten
PS: This arbor is so stupid, I feel bad.

[Beemererik]

Hi Tom,

Thanks for the generous offer. I will not make Davenport but have a friend that can stop by your booth if you attend to pick them up.

If I end up with duplicate parts when I find the bobweight, I know a younger guy who is starting to get involved in motors and will pass it along to him.

Erik

[T. Cotten]

How about, Erik,..

A new in its plastic tube #53-0090 "Balance Shaft assy"; a late '81 and up spacer, and apparently an appropriate nut,...

You can have them free at D-port if I make it.

Never used because its stupid.

....Cotten
PS: Sorry no pics because my office monitor died.

[Beemererik]

I am looking for an S&S bobweight or flywheel balancing kit. It is time to do some flywheel work. Please message photos and price
Balancer.jpg
Thanks,
Erik