Announcement

Collapse
No announcement yet.

WTB 74in Knucklehead Cylinders

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • WTB 74in Knucklehead Cylinders

    Hello,

    I recently purchased a 47 knucklehead FL engine. The only repop parts are the front and rear cylinders (VTwin Manufacturing). I would like to get a set of OEM cylinders (must be 74in 5 fin) but do not care about year.

    Thank you,

    Jesse

  • #2
    Jesse If you are going to run the bike why not stick to the VTwin barrels. If there is a weakness in a Knucklehead motorcycle it would have to be the FL barrels. That is why they are so hard to find. I personally would run other than VTwin barrels but they reportedly hold up. I have 3 FL knuckleheads and run either S&S or Flathead Power cylinders.

    Jerry


    Originally posted by Jesse View Post
    Hello,

    I recently purchased a 47 knucklehead FL engine. The only repop parts are the front and rear cylinders (VTwin Manufacturing). I would like to get a set of OEM cylinders (must be 74in 5 fin) but do not care about year.

    Thank you,

    Jesse

    Comment


    • #3
      Thanks for the reply Jerry. I have heard great things about the Flathead Power cylinders. As far as fit, any preference between the S&S and Flathead Power?

      Comment

      Working...
      X