Tweet
Hello folks. I am looking for ANY of the following transmission gears.I will pay more than fair market values for any of these gears.
These are racing gears for the 1948 to 1966 Harley- Davidson American made Lightweight models known by most as Hummers.
35051-59R main drive gear (25 teeth)
35720-59R countershaft 3rd gear (20 tooth)
35056-59R mainshaft second (22 teeth)
35691-59R countershaft second (25 teeth)
35051-62R main drive gear (24 teeth)
35720-62R countershaft 3rd (21 tooth)
I am also looking for a few NOS (New Old Stock) Linkert carb
parts. Most of these are flathead side valve parts ,so there should be plenty War surplus parts out there, (somewhere) No repop parts PLEASE,I can get them from Tedd if I want them..I have other NOS Linkert parts or complete carbs to trade for what I need..
I need the following::::::::::::::::::::::::::::::::::::::::: :::::::::::
27390-33 float bowl vavle cover cap(s)
27251-24 choke lever screw(s)
27235-29 float bowl nut(s)
27363-41 1 5/16" venturi
Also looking for a EXCELLENT condition Linkert M-18 (1948 to 1958 Servi-Car carb). I need only a BARE body with basically ZERO grooving in the throat of the carb (you can see this by removing the throttle disc and throttle shaft and examining the throat at that area) This wear is caused by loose throttle discs/shafts have worn away the throat.
If you have any of these parts to sell/trade,please email me or call me anytime .......................Mutt (903) 873-6644
These are racing gears for the 1948 to 1966 Harley- Davidson American made Lightweight models known by most as Hummers.
35051-59R main drive gear (25 teeth)
35720-59R countershaft 3rd gear (20 tooth)
35056-59R mainshaft second (22 teeth)
35691-59R countershaft second (25 teeth)
35051-62R main drive gear (24 teeth)
35720-62R countershaft 3rd (21 tooth)
I am also looking for a few NOS (New Old Stock) Linkert carb
parts. Most of these are flathead side valve parts ,so there should be plenty War surplus parts out there, (somewhere) No repop parts PLEASE,I can get them from Tedd if I want them..I have other NOS Linkert parts or complete carbs to trade for what I need..
I need the following::::::::::::::::::::::::::::::::::::::::: :::::::::::
27390-33 float bowl vavle cover cap(s)
27251-24 choke lever screw(s)
27235-29 float bowl nut(s)
27363-41 1 5/16" venturi
Also looking for a EXCELLENT condition Linkert M-18 (1948 to 1958 Servi-Car carb). I need only a BARE body with basically ZERO grooving in the throat of the carb (you can see this by removing the throttle disc and throttle shaft and examining the throat at that area) This wear is caused by loose throttle discs/shafts have worn away the throat.
If you have any of these parts to sell/trade,please email me or call me anytime .......................Mutt (903) 873-6644
Comment