Announcement

Collapse
No announcement yet.

1957/58 FL/FLH/Servi- front fender plastic trim/bumper

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1957/58 FL/FLH/Servi- front fender plastic trim/bumper

    Looking for an original plastic front fender trim/bumper for a 1957 or 58 FL/FLH, Servi-car also. Prefer an original, one holer, but would take a Eagle Iron repop-Thanks, BPK!!

  • #2
    Brian,
    The '57 and '58 are the same part but painted differently.
    Be sure to visit;
    http://www.vintageamericanmotorcycles.com/main.php
    Be sure to register at the site so you can see large images.
    Also be sure to visit http://www.caimag.com/forum/

    Comment


    • #3
      Hey Chris,
      I know the plastic tank emblems were different for 1957 and 58, but the front fender plastic tip was the same for both years? If 1957 was different from 58, I need one for 1957--Thanks-BPK!!

      Comment


      • #4
        I have never seen a plastic front tip with one screw hole.

        Comment


        • #5
          Early 57's were mounted with one screw originally. I have it that way on my 57 presently and seen a Servi-that way before, which I thought wasn't drilled properly. And, I guess the front fender plastic was different for 57 and 58 models, didn't know that. I think Eagle Iron only made the 57 version? Thanks, BPK!!

          Comment


          • #6
            Thanks folks-I have a tip on its way--Thanks, BPK!!

            Comment


            • #7
              BPK,
              The Eagle Iron tips are the two hole with a -57 part #. Even the two holes tend to crack over time.
              Did you find a single hole tip?

              Comment

              Working...
              X