Announcement

Collapse

AMCA Community Forum To Receive Upgrade

Attempts to upgrade the forum were unsuccessful and will be performed at a later date. We are sorry for any inconvenience this will cause members. Thank you for your understanding.
See more
See less

Sunnen wet hone with all the tooling needed to do Indian Chief lower ends.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Sunnen wet hone with all the tooling needed to do Indian Chief lower ends.

    This is a Sunnen wet hone in good working condition. I've had this for 45 years and done a lot of engines with it. It comes with all the mandrels and truing sleeves to do Chief connecting rods and cases. 2 of .720" mandrels for the upper rod bushings. A 1.5" mandrel for the lower rod races. And a 5 stone 1.375" mandrel for line honing Chief cases. I have a way to line hone ALL chiefs without case damage. Includes a bunch of spare stones and belts and a few extra gallons of cutting oil.
    I need $2200 for this. It's Pick Up only, I'm in Lakeland, Florida between Tampa and Orlando.
    Please contact direct at cdf6333@hotmail.com.

    IMG_2084.jpgIMG_2085.jpgIMG_2083.jpg
    Last edited by cdf6333; 05-21-2019, 10:09 AM.
Working...
X