I-Beam Springer Front-end, Complete

[40 Nuck]

For Sale: I have a chromed I-Beam Front end that is OEM, complete, straight, and unmolested (other than the chrome). This front end was on my 1940 EL, and I changed it out for a correct original. I know nothing about these I-Beams, so I need to do a little research to find out if it is correct for a VL or RL or WL ... anyone with experience in these, and can point out differentiating points would be much appreciated so that I can be more specific on the application. I am looking for $1200 for the front-end. Thanks for looking, and let me know if you have questions. Vic

[johnnyfire]

forks

Can you email me a few pics of the forks,thanks

[40 Nuck]

A little more info, and I'll get pics posted as soon as I figure that out ...

The neck is 1" (not 7/8" or 1-1/8") ... if there was a conversion done, it was done well, because I cannot tell. The total length is 28" from the center of the axle to the top of the acorn nuts. There is a code inside the I-Beam of the left rear leg as follows:

TC 100 TL {rectangular hallmark enclosing a CL} 4

The leading T may be a 7, and the second letter may be a G.

[Chris Haynes]

It is a D or R 45" fork, not VL. The VL had a 1 1/8" neck while the D and R 45's had 1". The W series 45's changed to the 7/8" stem.
Another thing to look for it the fender mounts. The VL fender mounted to the spring fork while the 45's are mounted to the rigid fork.

[40 Nuck]

Thanks, Chris ... you're right ... it's an RL, RLD. The fender mounts are on the rear fork. Much appreciated, as now I can properly identify it to potential buyers. Also, now that I know what I'm looking for, I was able to match the photos from other sources as well.

To potential buyers, these forks are chromed, with some very light surface rust in spots. They are straight, un-repaired, and complete except for rockers.

[Bobber59]

Thanks, Chris ... you're right ... it's an RL, RLD. The fender mounts are on the rear fork. Much appreciated, as now I can properly identify it to potential buyers. Also, now that I know what I'm looking for, I was able to match the photos from other sources as well.

To potential buyers, these forks are chromed, with some very light surface rust in spots. They are straight, un-repaired, and complete except for rockers.

40 Knuck...I am certainly interested in this front end. May I receive a pic or two, please? Send to: jfranco@ureach.com ...much appreciated.

Bobber59