Announcement

Collapse
No announcement yet.

Bosch ZE1 Mag problems

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bosch ZE1 Mag problems

    Dear Fellow AMCA Members;

    I have had recent problems with my 1912 Harley Davidson single. The bike starts and runs well until the mag starts cutting out at approximately 5 miles + on a ride. Points, plug, plug wire and all visible electrical is is fine shape. Appears my mag armature is giving out?

    Any advice on who can test and rebuild a Bosch ZE1 would be appreciated.

    Steve Klein
    AMCA Member 12176
    steve@steveklein.com
    361.652.8300 cell
    Steve Klein
    Collector . Conservator . Enthusiast
    American Pre-teens - 1965
    AMCA Member 12176
    Cherokee Chapter President, Editor
    www.CherokeeAMCA.org
    Steve@SteveKlein.com
    Georgetown, TX USA

  • #2
    Originally posted by stevekleincustom View Post
    Dear Fellow AMCA Members;

    I have had recent problems with my 1912 Harley Davidson single. The bike starts and runs well until the mag starts cutting out at approximately 5 miles + on a ride. Points, plug, plug wire and all visible electrical is is fine shape. Appears my mag armature is giving out?

    Any advice on who can test and rebuild a Bosch ZE1 would be appreciated.

    Steve Klein
    AMCA Member 12176
    steve@steveklein.com
    361.652.8300 cell
    Farm tractor supplys can usually rebuild old style magnetos. Just tell them it is from a Harley-Fergison. ;-)
    Be sure to visit;
    http://www.vintageamericanmotorcycles.com/main.php
    Be sure to register at the site so you can see large images.
    Also be sure to visit http://www.caimag.com/forum/

    Comment


    • #3
      A Massey Davidson?

      Chris...Thanks for the help.....Klein
      Steve Klein
      Collector . Conservator . Enthusiast
      American Pre-teens - 1965
      AMCA Member 12176
      Cherokee Chapter President, Editor
      www.CherokeeAMCA.org
      Steve@SteveKlein.com
      Georgetown, TX USA

      Comment

      Working...
      X