Results 1 to 2 of 2

Thread: 45 2nd Gear Bushing

  1. #1
    Join Date
    Feb 2011
    Posts
    17

    Question 45 2nd Gear Bushing

    Bushing is @ .044 longer than the gear hole depth. When pressing in how should the extra length be distributed? .022 on either side?
    Attached Images Attached Images

  2. #2
    Join Date
    Jul 2012
    Location
    Inman, South Carolina
    Posts
    71

    Default

    .022" on each side will be fine. You don't want more than .025" protruding from the left side. More than that could keep the second and high shifter clutch from engaging second gear fully.

    After first & second gear thrust washer has been selected I always press the bushing flush with the washer to eliminate any chance that the washer could come out of the recess in second gear, drop down and bind things up.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •