Search:

Type: Posts; User: Rubone

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    11
    Views
    328

    According to the parts book the UA uses a #5...

    According to the parts book the UA uses a #5 fixed jet.
  2. Replies
    2
    Views
    84

    They are correct facing up.

    They are correct facing up.
  3. Replies
    1
    Views
    77

    Ribbed cover with slotted screw were used by H-D...

    Ribbed cover with slotted screw were used by H-D from '55-'57, then the cover was smooth with a screw. No H-D boxes have numbers stamped in them.
  4. Replies
    11
    Views
    328

    aerozak, You will not find any info on the US...

    aerozak,

    You will not find any info on the US simply because the "S" itself was not stamped in the number, it merely meant sidecar equipped from the factory. And any UL could be ordered with a...
  5. And then of course common sense dictates inside...

    And then of course common sense dictates inside mounting. That way the pressure is distributed through the fender itself, outside mounting makes the pressure just on the nuts and washers and will rip...
  6. Replies
    28
    Views
    864

    My wife, who is a member of a Federal Disaster...

    My wife, who is a member of a Federal Disaster Team, is currently deployed to NYC to help with the immense overload to their medical sytems. They work 12 hour days 7 days a week. On the other hand I...
  7. Thread: Horn delco remy

    by Rubone
    Replies
    2
    Views
    162

    That version with 4 mounting strips was also used...

    That version with 4 mounting strips was also used on some Sportsters as well as Servi-Cars. The 4 strip started in '57 earlier just had two.
  8. Replies
    28
    Views
    864

    You certainly didn't offend me, I knew exactly...

    You certainly didn't offend me, I knew exactly what you were referring to. But it created confusion because H-D built a KH model so I was merely being my normal smartass self. I regularly offend...
  9. Replies
    28
    Views
    864

    That's pretty good even for you!!;)

    That's pretty good even for you!!;)
  10. Replies
    28
    Views
    864

    So can either of you twats spell hypocrite....?

    So can either of you twats spell hypocrite....?
  11. Replies
    28
    Views
    864

    No need for apologies Rollo, my guess is he...

    No need for apologies Rollo, my guess is he doesn't even know what an actual Harley-Davidson KH is.....:rolleyes:
  12. Updates, more years, lots of new info.

    Updates, more years, lots of new info.
  13. Replies
    4
    Views
    268

    At first glance it looks like a Harley K...

    At first glance it looks like a Harley K model/Sportster swing arm bearing retaining nut.
  14. Replies
    28
    Views
    864

    That is Knucklehead in hipster speak..... ...

    That is Knucklehead in hipster speak.....

    Dunlop K-70s would work well for him.
  15. Replies
    12
    Views
    439

    They don't have little balls in them (at least...

    They don't have little balls in them (at least OEM doesn't), there is a round ended pin that the key needs to push up into the elongated portion of the lock to release it. It should be visible in the...
  16. Replies
    2
    Views
    94

    O-Rings only on the Japanese built forks.

    O-Rings only on the Japanese built forks.
  17. Replies
    31
    Views
    1,102

    This answers a lot.... "....Cotten PS: If...

    This answers a lot....

    "....Cotten
    PS: If you're not begging attention, why did you post? "
  18. Replies
    11
    Views
    412

    It means the two parts were machined for a...

    It means the two parts were machined for a planned overly tight fit. Common on studs in aluminum where there was no reason to remove them.
  19. Replies
    11
    Views
    412

    If Ducati was using common practice at the time...

    If Ducati was using common practice at the time the studs are an interference fit and not intended to be removed. Heat will work but it needs to be at least 300 degrees+. Heat the assembly in an oven...
  20. Replies
    8
    Views
    282

    Which "276" did you get? There are many different...

    Which "276" did you get? There are many different throat (venturi) sizes. The needle jet and the needle are very simple. The jet has a fixed size hole, the needle a taper. The richness is determined...
  21. Replies
    6
    Views
    499

    GM starter motor shims line up pretty well.

    GM starter motor shims line up pretty well.
  22. Replies
    2
    Views
    163

    Tom Faber builds replica bars. What do you mean...

    Tom Faber builds replica bars. What do you mean by "custom"?
  23. Interesting on the early type cover.

    Interesting on the early type cover.
  24. S= Suppression, as in electrical system...

    S= Suppression, as in electrical system suppressed to be able to be in proximity of radios without creating static noise.
  25. Replies
    14
    Views
    590

    Bill, All the items I mentioned I have in my...

    Bill,
    All the items I mentioned I have in my collection. If you have something you cannot identify ask me if you like.
    Robbie
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4