Search:

Type: Posts; User: gsottl

Page 1 of 9 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    5
    Views
    374

    I would say it is only one clamping bolts for the...

    I would say it is only one clamping bolts for the front nose mount missing, as the second (front) one is the one with the adjuster screw attached to it.
  2. Thank you George - some very interesting links!

    Thank you George - some very interesting links!
  3. Perfect! Thank you JoJo357! I will check the...

    Perfect! Thank you JoJo357!

    I will check the links immediately and contact you.

    Best wishes,
    gsottl
  4. Harley 1956 Model KH - what is a good source for parts?

    Hello motorcycle enthusiasts,

    I think of buying a Harley KH from 1956 that has some wrong and missing parts and do not know much about these models.

    Can you let me know what parts suppliers...
  5. Replies
    20
    Views
    1,456

    on my 36 Chief I have a casting number above the...

    on my 36 Chief I have a casting number above the axle. Hard to read and I do not want to remove the paint, but it could be 35 C 12 F. The frame number is on the boss below the axle.
  6. Replies
    20
    Views
    1,456

    35-C-12-F sounds like an Indian casting number....

    35-C-12-F sounds like an Indian casting number. The frame number should be close to that. I can check on one of my frames if I find that casting number.
  7. I guess it willl take another month or two, as my...

    I guess it willl take another month or two, as my friend is in Czech Republic and I am in Austria and the borders are closed right now.

    THANK YOU for the compliments & recommandation!

    Greetings...
  8. Hi Miriam and Paul, I hope to get a small...

    Hi Miriam and Paul,

    I hope to get a small batch of new made ones from a friend soon. Will let you know when I have them here.

    Best regards,
    Florian
  9. Thread: Frame number

    by gsottl
    Replies
    2
    Views
    1,318

    36 frames have a stud wenlded onto the right side...

    36 frames have a stud wenlded onto the right side vertical support tube under the seat which holds the exhaust of the Upside-down Fours. If you do not have that stud on your frame it is very likely a...
  10. Replies
    6
    Views
    565

    FFVRS 53 is Indian 2 cylinder and FFVRS 56 is...

    FFVRS 53 is Indian 2 cylinder and FFVRS 56 is Harley according to an original Bosch catalogue I have. Please see attached page. I will also look for point gap sugestion, but asume it is the same as...
  11. in the attached icture you see the correct...

    in the attached icture you see the correct casting style for 1941-45. Yours are all 1946 and later I would say.
  12. Replies
    3
    Views
    440

    That depends on the type of Motolamp. 1939up...

    That depends on the type of Motolamp. 1939up Motolamps did not have a glas that was held to the bezel my 3 clips. On these the glas sometimes sticks to the gasket that sits between the glas and the...
  13. a friend of mine repaired this 401 frame by...

    a friend of mine repaired this 401 frame by brazing and reinforcing it with a steel insert. He said the castings were not well tempered and very brittle on the surface if remember correctly. It had...
  14. Replies
    1
    Views
    501

    it should also work without the springs if the...

    it should also work without the springs if the bearings balls are clean and everything is oiled with lightweight oil. I use that type of kicker mechanism on my 1950 Chief since years without the...
  15. Replies
    150
    Views
    26,197

    forks are the same on 401/402 and 101 Scouts -...

    forks are the same on 401/402 and 101 Scouts - Chiefs have a different fork, but also a completely different front fender. The difference between the 101 and 401/402 frontend is the spring. Scout has...
  16. Replies
    20
    Views
    3,245

    I will be at Kentīs spot every now and then, but...

    I will be at Kentīs spot every now and then, but am mostly running around to see what I can find. Kent can tell you who I am - Florian from Austria - only one on the field I guess :-) Would be good...
  17. Replies
    20
    Views
    3,245

    Hi Steve & people interested in these Chiefs! ...

    Hi Steve & people interested in these Chiefs!

    attached more pictures of what I found in my garage.
    I want to keep the one with the original cover, but the newly nickel plated breaker plate with...
  18. Replies
    20
    Views
    3,245

    Hi Steve, I need to check what I have.

    Hi Steve, I need to check what I have.
  19. Replies
    20
    Views
    3,245

    that is the braker plate - it is either an early...

    that is the braker plate - it is either an early version or misses one part that stabilizes the plate agains the timing cover. Have the other or complete version too, but no pictures on hand at this...
  20. Replies
    20
    Views
    3,245

    a friend of mine made a few of these...

    a friend of mine made a few of these points-covers (the ones which Kent Thompson had for sale) I can check what I still have left in parts for the 1934 battery ignition. One picture shows the correct...
  21. Thread: 1948 WR petcock

    by gsottl
    Replies
    5
    Views
    1,245

    that is what it looks like on my 46WR. Believe it...

    that is what it looks like on my 46WR. Believe it should look the same on a 1948WR.
  22. Thread: 1946 magneto

    by gsottl
    Replies
    7
    Views
    1,670

    in 1944 they skipped the oiing holes which are...

    in 1944 they skipped the oiing holes which are closed by the 2 hexagonal bolts on each side. So the one on ebay is an early version......
  23. Hi Gene, Thank you for your immediate reply....

    Hi Gene,

    Thank you for your immediate reply. Sounds interesting, although I would prefer the correct engine with non removable heads. Iīll send you a PM for the details on the 27 engine.

    gsottl
  24. 1923 Indian Chief or Big Chief engine or parts wanted

    I am looking for a powerplant for a 1923 Indian Chief chassis I rencently found. Can be 61ci or 74ci (engine number would be 80V101up for the 61ci and 90V101up for the 74ci motor) Also interested in...
  25. Replies
    7
    Views
    1,079

    that is the Chief head I have. believe it to be...

    that is the Chief head I have. believe it to be correct. It is drilled and pluged (thik that this is factory original, but am not 100% sure)
Results 1 to 25 of 207
Page 1 of 9 1 2 3 4