Search:

Type: Posts; User: VPH-D

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    3
    Views
    607

    I have never seen a factory photo of late 43 thru...

    I have never seen a factory photo of late 43 thru 45 machine with any but the grey ones. I believe the other colors were parts department replacements.
    VPH-D
  2. Replies
    4
    Views
    355

    I think 65 was the last year Speedster bars were...

    I think 65 was the last year Speedster bars were an option.
    VPH-D
  3. Thread: 12v BATTERY

    by VPH-D
    Replies
    15
    Views
    1,733

    I've been using AGM batteries for a while, and...

    I've been using AGM batteries for a while, and now have Duracell Dura12-12F2 batteries in two Panheads. They look similar to the Yuasa in the previous post. You mention a starter motor rebuild, I...
  4. Replies
    18
    Views
    1,728

    The J cam is hotter than the stock FLH cam. I...

    The J cam is hotter than the stock FLH cam. I don't believe anyone makes an FLH equivalent cam, so you'll have to find a used one.
    VPH-D
  5. Replies
    18
    Views
    1,728

    I've found the Andrews J cam to work well in...

    I've found the Andrews J cam to work well in Panheads.
    VPH-D
  6. Replies
    4
    Views
    489

    The FLH decal was not installed on FL models....

    The FLH decal was not installed on FL models.
    VPH-D
  7. Thread: Tire pressures

    by VPH-D
    Replies
    4
    Views
    442

    I called Coker about tp on some new Super Eagle...

    I called Coker about tp on some new Super Eagle tires, and was told 30-32 psi. My new tires were super squirrely for about 300 miles, be careful.
    VPH-D
  8. Replies
    1
    Views
    334

    Service Bulletin #647 from 4/73 addresses the...

    Service Bulletin #647 from 4/73 addresses the difference between oiling systems and cam covers. I don't know how to post, maybe someone else can post it for you.
    VPH-D
  9. Thread: Tappets clicking

    by VPH-D
    Replies
    5
    Views
    681

    When the 20w50 oil came out, we were told it was...

    When the 20w50 oil came out, we were told it was the new wonder oil, suitable for use in everything. After negative feedback from Pan people, we recommended it only for Shovels with hyd. lifters. 75...
  10. Thread: Tappets clicking

    by VPH-D
    Replies
    5
    Views
    681

    Back in the day, we were told to sell only H-D...

    Back in the day, we were told to sell only H-D 75W for use in Shovels with hydraulic lifters, not 105W. I remember the four turns method being used all the time.
    VPH-D
  11. Thread: Linkert DC-12

    by VPH-D
    Replies
    7
    Views
    1,050

    If the tickler takes the place of a stock carb...

    If the tickler takes the place of a stock carb part, it would not be acceptable for judging. If simply added to the bike, it is considered an accessory, and ignored during judging.
    VPH-D
  12. I bought a can of heat resistant silver from H-D...

    I bought a can of heat resistant silver from H-D a little over a year ago. The p/n is 98660-78, it had to be ordered, and cost about $24.00. This color is correct for Panhead,
    most Shovelhead, and...
  13. Replies
    2
    Views
    439

    Bill, The top set is 70-72 H and CH. Middle is...

    Bill,
    The top set is 70-72 H and CH.
    Middle is 67-69 H and CH.
    Bottom is a 74 and later FX stuck in a Sportster bracket.
    VPH-D
  14. Replies
    30
    Views
    3,608

    I've had belt drives on Panheads since the 70s,...

    I've had belt drives on Panheads since the 70s, and like them. Belt alignment is critical to long belt life.
    VPH-D
  15. Thread: 1946 16" rim

    by VPH-D
    Replies
    6
    Views
    778

    Not that it matters much, but an October 46 rim...

    Not that it matters much, but an October 46 rim would have been on an early 47 model.
    VPH-D
  16. Replies
    7
    Views
    935

    According to the parts book, the chrome cover...

    According to the parts book, the chrome cover started in 64. Practically everyone I knew back in the early 70s in the Chicagoland area had a chrome cover. Almost all had extended forks and a goofy...
  17. Replies
    7
    Views
    949

    If the bike is not registered as a 1947 Harley...

    If the bike is not registered as a 1947 Harley Davidson, the value is cut by at least half.
    VPH-D
  18. Replies
    5
    Views
    978

    I think the tapped hole in the motor mount is a...

    I think the tapped hole in the motor mount is a Tilly remnant.
    VPH-D
  19. Replies
    5
    Views
    978

    1970 You have the correct bracket, my memory was...

    1970
    You have the correct bracket, my memory was wrong. The -76 parts book shows a 9957 clip and 5915B spacer on page 116, with the comment 71 and later throttle beneath tank.
    VPH-D
  20. Replies
    5
    Views
    978

    IIRC, the cable is held near the carb by the air...

    IIRC, the cable is held near the carb by the air cleaner support bracket. The bracket bolts to the underside of the rocker box, and to the backside of the air cleaner back plate, and uses a 9957 type...
  21. Thread: Bendix Carb

    by VPH-D
    Replies
    5
    Views
    975

    IIRC, the Facet kit has the pink pump boot, which...

    IIRC, the Facet kit has the pink pump boot, which actually fits into the well. The other kit [black boot?] does not work. Look into the carb throat, on the roof of the carb throat just in front of...
  22. Replies
    12
    Views
    1,283

    I agree with Sargehere. Neither myself nor any...

    I agree with Sargehere. Neither myself nor any close friends with tin primary bikes, run primary chains, we all have belts.
    VPH-D
  23. Replies
    8
    Views
    1,682

    The Conti K112, or the Avon Safety Mileage tire...

    The Conti K112, or the Avon Safety Mileage tire work well on older bikes, as well as having the tall profile these bikes had with the original tires. This past Spring I put Coker Super Eagle thin...
  24. Replies
    13
    Views
    2,060

    Thanks Chris, that makes sense ... VPH-D

    Thanks Chris, that makes sense ...
    VPH-D
  25. Replies
    13
    Views
    2,060

    Robbie, Do you have the part number, or a...

    Robbie,
    Do you have the part number, or a description, for the spacers you mention? I don't see any spacers in my parts books.
    Thanks,
    VPH-D
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4