Search:

Type: Posts; User: Rubone

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds; generated 29 minute(s) ago.

  1. All tank fitting from '48-'65 are in the same...

    All tank fitting from '48-'65 are in the same location. All frame dimensions are the same as well. Some lines were designed with a vibration loop in them and mount inside the frame. Some are a...
  2. Replies
    5
    Views
    123

    Not sure if you can blow this up enough for a...

    Not sure if you can blow this up enough for a better look at it Steve. I can possibly crop it.

    30071
  3. Replies
    3
    Views
    94

    The '49 tooth sprocket as used on the KH/KHK was...

    The '49 tooth sprocket as used on the KH/KHK was the same inner diameter, only the tooth pitch, outer diameter was smaller. They fit any K/Sportster drum. The 'cogs" are merely cast in blocks on the...
  4. Replies
    6
    Views
    132

    Lots of that aftermarket stuff is from India and...

    Lots of that aftermarket stuff is from India and is hit or miss on quality.
  5. Replies
    6
    Views
    132

    All the early ones are 3/8 stud. From '40 up the...

    All the early ones are 3/8 stud. From '40 up the 7/16 bolts were used on solo models and the 3/8 studs continued with Servi-Cars (which never had the alloy head option) until '51. Any combination can...
  6. Replies
    20
    Views
    553

    RIP "Sarge", Gerry Lyons

    I just saw on another site where Gerry has passed on. One of many who dedicated his life to the betterment of the vintage/antique motorcycle world. He was the force behind the 36EL registry as well...
  7. Replies
    256
    Views
    5,965

    Sticky: Can't get into the thumbnails personally.

    Can't get into the thumbnails personally.
  8. Replies
    13
    Views
    1,133

    Thor, H-D never built one of those racks, they...

    Thor, H-D never built one of those racks, they are all aftermarket. However there is period aftermarket (Comiskey are stamped) but also Nation-Bilt and others. Paughco built repops for a long time...
  9. Replies
    10
    Views
    233

    It looks like this is it. It measures about...

    It looks like this is it. It measures about 2-3/16 inside. It has a back bevel to clear the spokes when installed and is about 1" deep . It is also brand new so the threads are perfect. PM me.
    ...
  10. Replies
    10
    Views
    233

    I have these two, I believe the larger diameter...

    I have these two, I believe the larger diameter one is the one you need. What is the approximate OD of the threads?
  11. Replies
    10
    Views
    233

    Totally different type hubs and drums on his '36.

    Totally different type hubs and drums on his '36.
  12. Replies
    2
    Views
    146

    For what?? Unit, Pre-Unit, Cub, there are many...

    For what?? Unit, Pre-Unit, Cub, there are many options...
  13. Replies
    10
    Views
    233

    I believe I have an early one. I'll look later to...

    I believe I have an early one. I'll look later to make sure.
  14. Replies
    7
    Views
    270

    It did not "break", it was a plug for the...

    It did not "break", it was a plug for the original hole....
  15. Replies
    7
    Views
    270

    First you need to determine if it is a cut off...

    First you need to determine if it is a cut off bolt or a cast iron plug.
  16. Thread: Battery Wire

    by Rubone
    Replies
    4
    Views
    469

    Ground wires were the same gauge as the rest of...

    Ground wires were the same gauge as the rest of the harness until the electric start models were introduced.
  17. Replies
    6
    Views
    346

    The only way 45 will fit is if the race is quite...

    The only way 45 will fit is if the race is quite worn. A standard race and 44 standard rollers do no allow enough room to force in an extra. Something is well worn. Most often when OS rollers are...
  18. Thread: Zerks?

    by Rubone
    Replies
    15
    Views
    736

    Those are Alemite fittings.

    Those are Alemite fittings.
  19. Thread: Zerks?

    by Rubone
    Replies
    15
    Views
    736

    Those will work, but the threaded section is...

    Those will work, but the threaded section is longer than H-D used.
  20. Thread: Zerks?

    by Rubone
    Replies
    15
    Views
    736

    I used to buy them from Napa in bulk. Don't know...

    I used to buy them from Napa in bulk. Don't know if they still sell them. However the profile was a bit different than OEM. Good luck.
  21. Thread: Arm Rests

    by Rubone
    Replies
    2
    Views
    145

    The inside flap needs to be lifted up, the nuts...

    The inside flap needs to be lifted up, the nuts are underneath in the body channel.
  22. Thread: Antique Riders

    by Rubone
    Replies
    6
    Views
    380

    You must have pie for breakfast!!

    You must have pie for breakfast!!
  23. Mick, do you sell just the rear straps and clamps...

    Mick, do you sell just the rear straps and clamps alone? Don't need springs or the recoil check.
    Thanks
    Robbie
  24. Replies
    8
    Views
    194

    I guess it would depend on how correct you are...

    I guess it would depend on how correct you are trying to make it. What year engine? In pieces or together?
  25. Replies
    8
    Views
    194

    Sadly the BT SV -39 type are thin on the ground....

    Sadly the BT SV -39 type are thin on the ground. Lots of the threaded ones since VLs 45s and early U series all used them. I don't think I have any extra of them, but I probably have a couple dozen...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4