Tweet
See images - There is a mounting stud for the ignition coil – ‘72341-48 – terminal box and spark coil stud’.
Everyone sells this as a CAD plated stud, nut and washer – see colony image, but none of these items are listed in Palmers as being CAD plated? However, there is an image on page 557 of Palmers showing the CAD plated stud with a parkerised nut, so that’s what’s on my 48 Pan.
The judge says it’s wrong and it should all be CAD (ding, ding!), What’s the story in real life?
Thanks Greg
IMG_9482.JPEG
IMG_9483.JPEG
IMG_9484.JPEG
coil mounting studs and nuts.jpg
coil mounting studs and nuts 1.jpg
Everyone sells this as a CAD plated stud, nut and washer – see colony image, but none of these items are listed in Palmers as being CAD plated? However, there is an image on page 557 of Palmers showing the CAD plated stud with a parkerised nut, so that’s what’s on my 48 Pan.
The judge says it’s wrong and it should all be CAD (ding, ding!), What’s the story in real life?
Thanks Greg
IMG_9482.JPEG
IMG_9483.JPEG
IMG_9484.JPEG
coil mounting studs and nuts.jpg
coil mounting studs and nuts 1.jpg