Would a pic of Mrs. Swim without the extra knuckles help?
Mrs Swim of Swim HD.jpg
....Cotten
Parkerizing - cad plating - painting 1947 Harley FL
Collapse
X
-
Could be just a nice bright new cad fitting in the sun light? I see transmission top looks pretty bright. She was really squinting with the sun in her eyes.
Leave a comment:
-
Rubone, I know the lifter towers, and oilpumps were painted white during the war year knuckles and this is a really early 46 ( black gas caps and painted badges etc but I had never seen the white painted retaining nuts on the oil lines were they mount to the oil tank nipples.
Leave a comment:
-
And with an aftermarket fender tip already installed!Originally posted by KNUCK View PostHere it is, but not a 1947. As you can see no license plate on it and fresh looking. The dealer is Swim Harley Davidson! DSCN4332.JPG DSCN4335.JPG
Leave a comment:
-
Here it is, but not a 1947. As you can see no license plate on it and fresh looking. The dealer is Swim Harley Davidson! DSCN4332.JPG DSCN4335.JPG
Leave a comment:
-
Some times you can see in the photos of the bikes he took what the plating is even if it is not specifically mentioned. I have a photo of a brand new 1946 Harley EL that was taken when the bike was new with the dealers wife sitting on it dressed in her new riding gear. Will try to find it.
Leave a comment:
-
Different alloys of steel, temperature, and chemical proportions will affect the color of Parkerizing. H-D employed many different alloys of steel based on application; and production schedules created variations in vendor supplied materials, especially post WW2 as American manufacturing struggled to keep up with consumer demand. This influenced ALL manufacturing including auto production so I don't think anyone can write biblical documents that will be 100% correct regardless of product. Bruce Palmer has made everyone an expert with his H-D restoration books which are peer reviewed and updated accordingly by Bruce. Be glad he has handed this stuff to us on a silver platter.
Leave a comment:
-
Palmer's new Revised Third Edition is being shipped by the printer, hopefully, tomorrow. He survived the hurricane but is without power and his property is a mess so give him some time before ordering.
Leave a comment:
-
Even in the appendix where all finishes are listed by year it seems some parts aren’t included. Usually a look in previous years gives you a clue. Speaking of variations in shade, I’ve had parts with different shades done in the same batch together.
Leave a comment:
-
From your reference of pages 790-793 you are in the 2nd edition. Just go to pages 903 thru 905. I would suggest going thru your parts manual item by item and if its not on those pages that say parkerize, cad plate, black paint, etc., then look elsewhere in Bruce's book under those items or then ask those specific unfound items finish requirements. Sorry, but yes, a little effort is needed here, be thankful Bruce has done what he has done!! 3rd edition will even help you more.Originally posted by samsmc1 View PostCotten
I've just spent the past 2 hours looking thru Palmer's books and on the net looking for any kind of chart showing what type of plating goes on various pieces of this '47 Knucklehead.
All I've found so far is on page 790-793 showing various parts that look mostly like 45's to me. This helps but is very incomplete.
There has to be a chart somewhere so a more common bike like a Knucklehead being judged can be properly authenticated.
I know if your getting a Model T or Model A judged, they have books like Palmer's that show even the proper cotter pins and their finish.
Where can I get this information? I know I've seen this somewhere in the past but where.
I understand what you and Otis are saying about not doing everything in one batch
Sam
Leave a comment:
-
Not sure what you are looking at or where but Palmer's has every finish for every year listed by year. Occasionally new info is found, but it is pretty close to exact.Originally posted by samsmc1 View PostCotten
I've just spent the past 2 hours looking thru Palmer's books and on the net looking for any kind of chart showing what type of plating goes on various pieces of this '47 Knucklehead.
All I've found so far is on page 790-793 showing various parts that look mostly like 45's to me. This helps but is very incomplete.
There has to be a chart somewhere so a more common bike like a Knucklehead being judged can be properly authenticated.
I know if your getting a Model T or Model A judged, they have books like Palmer's that show even the proper cotter pins and their finish.
Where can I get this information? I know I've seen this somewhere in the past but where.
I understand what you and Otis are saying about not doing everything in one batch
Sam
Leave a comment:
-
Ford folks, Sam,...Originally posted by samsmc1 View PostCotten
I've just spent the past 2 hours looking thru Palmer's books and on the net looking for any kind of chart showing what type of plating goes on various pieces of this '47 Knucklehead.
All I've found so far is on page 790-793 showing various parts that look mostly like 45's to me. This helps but is very incomplete.
There has to be a chart somewhere so a more common bike like a Knucklehead being judged can be properly authenticated.
I know if your getting a Model T or Model A judged, they have books like Palmer's that show even the proper cotter pins and their finish.
Where can I get this information? I know I've seen this somewhere in the past but where.
I understand what you and Otis are saying about not doing everything in one batch
Sam
Must be like AMCA judges who think the people who made these things were infallible godz.
A lot of variation in park'd finishes can be attributed to not only different recipes of moly, zinc, etc, but also whatever they were 'oiled' with afterward. We can presume much went straight into Cosmo, and Indians' didn't exactly match productions for HDs:
COSMOS1.jpg
Its all about faking it authentistically; Pick a shoepolish to fit your tastes!
...Cotten
PS: Most people also realize that original cad darkened naturally, much of it to the point of appearing park'd.
(My modern provider warned against storing fresh cad in closed containers.)Last edited by T. Cotten; 10-12-2024, 12:19 PM.
Leave a comment:
-
Cotten
I've just spent the past 2 hours looking thru Palmer's books and on the net looking for any kind of chart showing what type of plating goes on various pieces of this '47 Knucklehead.
All I've found so far is on page 790-793 showing various parts that look mostly like 45's to me. This helps but is very incomplete.
There has to be a chart somewhere so a more common bike like a Knucklehead being judged can be properly authenticated.
I know if your getting a Model T or Model A judged, they have books like Palmer's that show even the proper cotter pins and their finish.
Where can I get this information? I know I've seen this somewhere in the past but where.
I understand what you and Otis are saying about not doing everything in one batch
Sam
Leave a comment:
-
I do my parkerizing in smaller batches for 2 reasons; first because any contamination isn’t good so I take it straight from the blast cabinet to the heated solution handling with gloves and second I would loose interest in blasting long before I could do everything on a bike. And as Tom said different parts take different shades, I assume by alloy.
Leave a comment:
Leave a comment: