1936 Knuckle

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • T. Cotten
    replied
    Originally posted by Chris Haynes View Post
    First design were nickle wash. Second design were copper plated.
    T'aint electroplate copper, Chris!

    That risks hydrogen embrittlement.

    Certainly you have seen crankpins with the copper, as well as pushrod adjustors, Pan rockerarms, and the like.
    I was told the parts were literally submerged in molten copper during the heat-treat, and then machined afterward.
    Certainly not a cheap process!

    Ulf needs the nickel that nobody wants to produce correctly, even the platers with antique motorcycles themselves.

    ....Cotten
    Last edited by T. Cotten; 11-17-2018, 09:32 AM.

    Leave a comment:


  • Chris Haynes
    replied
    First design were nickle wash. Second design were copper plated.

    Leave a comment:


  • T. Cotten
    replied
    The copper "dip" was part of the hardening process,...

    Or so I was told, Folks!

    I always wanted exposed rockers.

    ....Cotten

    Leave a comment:


  • 1950Panhead
    replied
    I've owned four knuckles, looks like copper plate.
    KnuckleRockerArm.jpg

    Leave a comment:


  • ulfhd
    started a topic 1936 Knuckle

    1936 Knuckle

    Hy,i am nearly Finished with my Engine know the question the Rocker Arms Nickeld or Paint what is corect thanks Ulf 36 Open Rocker
Working...