Tweet
C7CE6AB6-B174-4406-8114-3875CB060488.jpg6EE9E3BE-9BC5-4477-84C0-CF0A96945FA5.jpgi have been working on a ‘46 WL for awhile but could never get it right. So Ibuilt this contraption to do a bubble test. It’s designed after one Cotten built so thank you sir. Anyway I found the leak and thought it was the nipple but turns out it was the manifold. It is not 45% so it will never physically seal. Vender says they found out they he’d a bad batch and will make it right, but it was driving me nuts, I checked everything.
NOTICE: New member email requirements now in effect. Longtime member having trouble logging in? Please review the requirements here.
Only registered users may post new messages on this forum. You must be an AMCA member to register. Click the register link on the top right to proceed.
If this is your first visit, be sure to check out the FAQ by clicking the link above. To start viewing messages, select the forum that you want to visit from the selection below.
If you are NOT an AMCA Member and would like to join Click Here