Restore Original Paint

[ricmoran]

Rich!

I would get Johnson's Wax across the street at the hardware store, but I have several cans left from dumpsters. It is widely available.

Its good for polished leather too.

"Lemon Pledge", also an S.C. Johnson product, was great... until they changed it to a wax-free formula.

....Cotten

Look for S.C. Johnson Paste Wax.

Thanx Exeric and Tom, found it listed here : http://www.homedepot.com/p/SC-Johnso...203/100154748#

[Lonnie]

Back in the seventies, we used the Johnson wax on old cars painted with the nitrocellulose lacquer paint. It's one of those waxes you can't let dry, you apply and rub it off. Like Mr. Yiagi said, "Was on, Wax off". Great stuff, not like these soft paste waxes most folks use now.

[Rod K]

I used to use lemon pledge to shine up my new painted Indian. I did notice a change and called SC Johnson Co to see if there was any silicone in the product. They had a tech person call back and confirm that there is. Now I wouldn't use it for anything.
...Rod

[T. Cotten]

Rich!

I would get Johnson's Wax across the street at the hardware store, but I have several cans left from dumpsters. It is widely available.

Its good for polished leather too.

"Lemon Pledge", also an S.C. Johnson product, was great... until they changed it to a wax-free formula.

....Cotten

[Rollo]

I was told years ago by a guy who is a tire expert (tests them for a living) that putting paste wax on your side walls will keep them form weather cracking also. It is basically what they used to use in tire molds as a releasing agent to let the new tire be taken out of the mold. Seems to work for me all these years.

Tom (Rollo) Hardy
AMCA # 12766

[exeric]

Look for S.C. Johnson Paste Wax.

[ricmoran]

You might want to try this: http://www.carwell.com/products-cp-90.htm

In Canada this is known as Crown Rust Control. Their logo is seen on Speed Channel sometimes. Amazing stuff, it is red but when it goes on it turns clear and leaves a gun oiled finish look that does not harm paint.

No HAZMAT in the product as it is a petroleum hydrocarbon that is highly refined.

Parkerizing loves this stuff, lasts anywhere from 4 months to a year (for corrosion protection) depending on exposure and the real interesting thing is you can paint over the product if you wish. Apply, let it absorb into
the metal for 24 - 48 hours, soap and water the residual product off an paint.

Only oil based product I know of where tests performed by DuPont have shown zero interference with paint bonding.

Not that your going to want to paint the finish on your bike, but the protection the product offers is superb.

Also is the best product I've found in years for use with frozen fasteners. Treat, let the product sit for a few minutes (depending on how much scale has built up) and amazingly frozen fasteners come loose easily.

Have a friend who used this on his original paint VL. He said it is the best product he's ever used for bringing old paint back to life.

Tom, the wax you'd shown, looks like it is not manufactured anymore. Looked and did not see anything on the web.

[55tmm]

I didn't seem to notice any discoloration,try an inconspicuous place first,
It was not my recipe but recommended by a restorer with good results on old rusty sheet metal.
Gibbs, now SP3 is also red in color, I'm learning other methods here as well and may try some.
I would hate to hear bad results because of me, use at your own comfort level. Thanks

[T. Cotten]

55tmm!

Doesn't that red MMO stain chalky paint?

Gibbs is new to me, what color is it?
Johnson's is old. And you can tint it if you really like to.....

I prefer a hard layer of protection before any volatile, other than petrolatum, of course!


....Cotten

[55tmm]

Rod,
I sprayed it on my cylinders when it was first cleaned, but it just burns of when it runs, just recoat occasionally.

[Rod K]

Paint looks good. I like the nice low sheen. Any ideas for the cylinders. I have a 12 single cyl that looks very much like yours.
I would like to keep it from rusting further. I can't bring myself to paint it.....Rod

[55tmm]

My Bikes 032.jpgMy Bikes 036.jpg
My JD after that 3 part mixture.

[rbrockhoff]

Thanks for all of the suggestions. I have a 1913 Yale and I am looking for a look something like this old indian http://www.yesterdays.nl/indian-1912-single-pi-843.html I basically want the unrestored look, while preventing any future degradation in the original finish. I had not heard of Johnson's wax and I had not heard of the mix of Gibbs, Kerosene, and mystery oil. It sounds like I need to do some experimenting to figure out which will look best for my application.

[c.o.]

Cotten! Thanks for mentioning that as well. I'm gonna try and keep that one in the memory bank!

rbrockhoff.... 1913 eh? You've got me wondering in suspense.....

[exeric]

I'm glad you posted that Tom. I've been using Johnson's Wax to keep my bikes 'stable' here in the Florida humidity. Personally, I've not found a better product.