Announcement

Collapse
No announcement yet.

Relay lid fonts

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Relay lid fonts

    Let me ask a dumb question here. Did the two post relay 39 and down have Delco-Remy on the lid and if so was it the same fonts as the later three post. Thanks, Bob L
    AMCA #3149
    http://www.thegoodoldmotorcyclepartscompany.com

  • #2
    In looking at factory photos I can see Delco-Remy on 1934's and 1936's. Other years are not visible. So with that in mind I would say they all say Delco-Remy on them.
    Be sure to visit;
    http://www.vintageamericanmotorcycles.com/main.php
    Be sure to register at the site so you can see large images.
    Also be sure to visit http://www.caimag.com/forum/

    Comment


    • #3
      Hello i do have some with out delco on them.But they are a early replacement ones not delco.

      Comment


      • #4
        Bob- I have learned that my 26 JD should only say "Delco" without the Remy. Per Lippolt. More to learn..........
        Dan Margolien
        Yankee Chapter National Meet July 31/August 1 2020 at the TERRYVILLE Fairgounds, Terryville CT.
        Www.yankeechapter.org
        Pocketvalve@gmail.com

        Comment


        • #5
          Thanks Dan, let me take this one step further. Do the three post lids even fit the two post? Bob L
          AMCA #3149
          http://www.thegoodoldmotorcyclepartscompany.com

          Comment


          • #6
            Bob
            The only way I have found to identify HD cut-outs is that they have a smaller dia bobbin than other Delco ones.
            A HD lid will not fit over the bobbin on other Delco cut-outs
            I don't know for sure if this is a given but until now its been the only way I have been able to identify one from another.
            All the lids in the attached photo will not fit on a large bobbin cut-out. I have these four variations but do not have any with just Delco on them.
            Its a good question you have asked and I hope I can learn from it.
            Attached Files
            Peter Thomson, a.k.a. Tommo
            A.M.C.A. # 2777
            Palmerston North, New Zealand.

            Comment


            • #7
              There is a rumour that the capital letters for Delco Remy were used 1926-32 and the script lettering thereafter. Can anyone substantiate this?

              Comment


              • #8
                Does anyone have an idea as to when Delco appeared on the scene? I'm assuming that one company bought the other?
                Mark Masa
                Mark Masa
                www.linkcycles.com

                Comment


                • #9
                  "Remy's competition was Dayton Engineering Laboratories Company (Delco) under the leadership of Charles F. Kettering. Kettering also manufactured ignition equipment and generators.
                  The United Motor Company purchased the two competitors in 1916 and incorporated them into their operations. The companies remained separated until purchased by General Motors two years later.
                  In 1918, Delco Remy began operating as a division of General Motors,...."
                  from http://en.wikipedia.org/wiki/Delco_Remy
                  Bill Gilbert in Oregon

                  Comment

                  Working...
                  X