Announcement

Collapse
No announcement yet.

1938 Horn Assembly to Fork

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1938 Horn Assembly to Fork

    Can anyone supply an exploded view of the horn to fork assembly for a 1938 big twin? My parts books only have the view for the later version. I checked the virtual library and didn't see anything there that shows the view I'm looking for.

    Steve Slaminko

  • #2
    What exactly are you looking for? It is a pretty straight foreword install. The '38 used a horn with to bracket riveted to the back. The mountings attached to the screws that hold the horn together, The rubber on top and spring plates on the bottom.
    Be sure to visit;
    http://www.vintageamericanmotorcycles.com/main.php
    Be sure to register at the site so you can see large images.
    Also be sure to visit http://www.caimag.com/forum/

    Comment


    • #3
      Chris,

      I was hoping to have the exploded view to make sure I get the correct hardware and also to insure I get the whole thing assembled properly. Palmer gives a pretty good description of the assembly. I will be able to get it assembled but if a illustration exists I'd like to see if.

      Thanks!

      Comment


      • #4
        It connects to the fender at the bottom and the fork spring perch on top. Thanks Robbie.

        Last edited by Chris Haynes; 04-25-2020, 01:09 PM.
        Be sure to visit;
        http://www.vintageamericanmotorcycles.com/main.php
        Be sure to register at the site so you can see large images.
        Also be sure to visit http://www.caimag.com/forum/

        Comment


        • #5
          It doesn't attach to the handlebars, it attaches to the fork spring perch.
          Robbie Knight Amca #2736

          Comment


          • #6
            Chris and Robbie,

            Thanks guys. Picture is a big help. Your help with my many questions over the years is always appreciated.

            Steve Slaminko

            Comment


            • #7
              I will never remember what little I did know but isn't that the wrong horn?

              Comment


              • #8
                Originally posted by steve marxen View Post
                I will never remember what little I did know but isn't that the wrong horn?
                Chris's picture is to show the mounting. He wasn't trying to picture a 9 bolt horn.
                Robbie Knight Amca #2736

                Comment


                • #9
                  Originally posted by steve marxen View Post
                  I will never remember what little I did know but isn't that the wrong horn?
                  It is now. But it won't be after 3 holes are installed.
                  Be sure to visit;
                  http://www.vintageamericanmotorcycles.com/main.php
                  Be sure to register at the site so you can see large images.
                  Also be sure to visit http://www.caimag.com/forum/

                  Comment

                  Working...
                  X