Announcement

Collapse
No announcement yet.

1919 Harley F

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1919 Harley F

    I have been building a Harley F basket case and now working on the spiral twistgrips can someone please tell me how i secure the single cable in the steel slider that goes inside the handlebars, i have a small threaded piece that screws into the back of the steel slider but not sure if you solder it or just bend it .

    Nick

  • #2
    Nick,

    Part number 3322-09 is the wire fastening screw that screws into the back of the slider. You also need part number 3324-09 control wire end. The control wire goes through the wire end and is bent over into a slot in the back side. See the following pictures. If you're missing the control wire end I believe HD used this part number well into the 40's. It's usually sold as part of the inner control wire. 001.jpg002.jpg004.jpg

    Steve Slaminko

    Comment


    • #3
      Colony sells a kit with all the required items.

      http://www.flatlandmotorcyclecompany...-Prodview.html

      Comment


      • #4
        Many thanks for the help i now understand i have all the parts just needed that information

        Nick

        Comment

        Working...
        X