Announcement

Collapse
No announcement yet.

Daven-port!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Daven-port!

    Sorry if this rubs anybody,..

    But its Davenport time again, Folks!

    http://www.chiefblackhawk.org/

    For the first time, I'm bringing some personal stash, like a John Brown and an RM.
    And Milwaukee gems too.

    So please drop by at booth AG30, close to the race gate, opposite the little white schoolhouse 'museum'.
    (Look for tired cafe umbrellas...)

    Hope to see you there!

    ....Cotten
    Attached Files
    AMCA #776
    Dumpster Diver's Motto: Seek,... and Ye Shall Find!

  • #2
    Another bucket list event to attend one of these days.
    Craig (Delaware)
    Delaware Bay Chapter
    Perkiomen Chapter
    AMCA Member #1011

    Comment


    • #3
      Cotten,
      Hope to track you down there and pick your brain a bit. Will you have peek seals and floats with you ?
      This will be my first time at Davenport. About a 2,300 mi. drive. Hopefully I have no problems and will get there
      by Monday or Tuesday and rest up a bit before swap meet.

      Good luck to all.
      Rod
      AMCA#25781

      Comment


      • #4
        2019 Blackhawk poster
        Blackhawk 2019 poster.jpg

        Comment


        • #5
          I've cut seven kinds of floats, Rod!

          PEEK seals are something I must cut "one-off" for each manifold, as often the manifold needs work.

          Otherwise, its one-size-fits-none.

          I will have Chief manifolds fitted and ready, though, and kits for Power-Plus's with the proper gasket.
          And maybe a WL, a -33 V, and a K/WR if Colony ever sends back my nuts.

          ....Cotten
          Last edited by T. Cotten; 08-19-2019, 12:18 PM.
          AMCA #776
          Dumpster Diver's Motto: Seek,... and Ye Shall Find!

          Comment


          • #6
            Do't forget the races on friday nite
            img771.jpg

            Comment


            • #7
              Originally posted by T. Cotten View Post
              I've cut seven kinds of floats, Rod!

              PEEK seals are something I must cut "one-off" for each manifold, as often the manifold needs work.

              Otherwise, its one-size-fits-none.

              I will have Chief manifolds fitted and ready, though, and kits for Power-Plus's with the proper gasket.
              And maybe a WL, a -33 V, and a K/WR if Colony ever sends back my nuts.

              ....Cotten
              Cotton,
              I guess I should have supplied more info. Am working on a 40EL, original manifold M-25 carb. Sounds like seals are out How about a float?
              Thank you.
              Rod
              AMCA#25781

              Comment


              • #8
                As I posted, Rod,

                I'll have seven kinds of floats.

                If you had gotten the manifold to me a week ago, I could have outfitted it by the Meet.

                (If you didn't need new nuts, that is. Reproductions vary widely, and I fit the seals to the nuts as well as the manifold spigots).

                ....Cotten
                AMCA #776
                Dumpster Diver's Motto: Seek,... and Ye Shall Find!

                Comment

                Working...
                X