Announcement

Collapse
No announcement yet.

Question regarding frame

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Question regarding frame

    Hello Forum members ,
    Trying to find out model of this frame , and year is first 2 digits ?
    THANKS IN ADVANCE
    Attached Files

  • #2
    Yup, first two digits. The model is the F.
    Robbie Knight Amca #2736

    Comment


    • #3
      This is unknown to me hand stamped numbers on Harley frame what years was this done, where might they be . Thanks

      Comment


      • #4
        Robbie, Am I wrong? I was once told all the frame numbers had F on them whether they were Js or Fs. I am not challenging you on that it is just what I was once told. Hard to tell by the pictures but it looks like the stand studs on the rear of the frame are swaged(riveted] on as are the ones on my 25 frame. Am I wrong or were these only swaged into the frame for a few years? It seems to me the later ones are held by nuts.

        Cam

        Comment


        • #5
          Cam
          You are correct about the letter always being F. The frame pictured above is a 1925 and it could have been either a magneto ignition model or a generator model. This one however was a generator model as the control coil to the distributor is still connected to the decompression lever.
          Mark
          Mark Masa
          www.linkcycles.com

          Comment


          • #6
            Here is my project.. FE7A is on to back fork..
            What year this could be? 28 near I hope ��20181117_101652.jpg

            Comment


            • #7
              Your frame is 1928/29. The stand is a 1925-1929 FRONT stand.
              Mark
              Mark Masa
              www.linkcycles.com

              Comment


              • #8
                Thank you Mark letting know.
                Best Regards Juha

                Comment

                Working...
                X