We make motorcycle fenders for all types make and models of motorcycles all to as close to factory specs as possible . Indian, Harley, Cleveland, Pope, Yale, Sears,Henderson, Merkel,Excelsior, most British bikes All our fenders are rolled on form rollers and come out ready to prime and paint. We have over 200 fenders on our website and are adding to it weekly. If its not on our site please ask as we will probably be able to make it . Email us with your requirements enquiries@vintagesteel.com.au or visit our website www.vintagesteel.com.au
Announcement
Collapse
No announcement yet.
Veteran vintage fenders 1900 to modern
Collapse
X
-
Some of our Harley profiles and other fender profiles
We have been asked what Harley Fender profiles we have . The attached pictures shows the profiles we have. We also have the rollers to make the Pup and Peashooter fenders.
Along with the Harley range we can make fenders for Indian, Henderson, Pope, Yale, Reading Standard, Thor, Merkel, Cleveland,Sears, and hundreds of British European and Australian built bikes. Some profiles we don't have yet but if we could get an order for 20 fenders in a new profile we would look at making new roller sets for these. It all depends on the demand for a profile type. For example the profile for Knuckle Heads, V, VL, RL etc could be made if we can get enough to warrant the making of a roller set. The pictures are of a set of 1915 Harley fenders and a 1918 Henderson front Fender #21 harley 1915 Rear (13).jpg37 Henderson 1918 Front (14).jpg Email enquiries@vintagesteel.com.au Website www.vintagesteel.com.auLast edited by veterannorton; 09-21-2018, 12:46 AM.
-
Originally posted by veterannorton View PostWe have been asked what Harley Fender profiles we have . The attached pictures shows the profiles we have. We also have the rollers to make the Pup and Peashooter fenders.
Along with the Harley range we can make fenders for Indian, Henderson, Pope, Yale, Reading Standard, Thor, Merkel, Cleveland,Sears, and hundreds of British European and Australian built bikes. Some profiles we don't have yet but if we could get an order for 20 fenders in a new profile we would look at making new roller sets for these. It all depends on the demand for a profile type. For example the profile for Knuckle Heads, V, VL, RL etc could be made if we can get enough to warrant the making of a roller set. The pictures are of a set of 1915 Harley fenders and a 1918 Henderson front Fender [ATTACH=CONFIG]22763[/ATTACH][ATTACH=CONFIG]22764[/ATTACH]Steve Swan
27JD 11090 Restored
https://www.youtube.com/watch?v=ClUPIOo7-o8
https://www.youtube.com/watch?v=LtuptEAlU30
27JD 13514 aka "Frank"
https://forum.antiquemotorcycle.org/...n-Project-SWAN
https://www.youtube.com/watch?v=hNRB...nnel=steveswan
https://www.youtube.com/watch?v=RSDeuTqD9Ks
https://www.youtube.com/watch?v=bwlIsZKmsTY
Comment
-
Very nice job, and you see the price directly ,not like accurate...
Comment
-
We are aiming at coming over to Davenport next year with a big selection of our guards . We will bring a big crate with us so we could offer free freight for pick up at Davenport assuming we can sort out the logistics of getting there with our crate and required gear. Still a lot to sort out.
Here is a 1923 Ace front fender with 3 off the 4 Valances spot welded on . This one is off to the USA in a days time. 20181107_131325.jpg
Comment
-
Vintagesteel will be at the Mecum Auction in Jan 2020. Flights are booked and freight for fenders is sorted.
We will be bringing sample fenders for sale and fenders for some of our customers. We can bring orders to the auction freight free as they can go in our freight container.
We will aim at bringing Indian fenders from veteran through to around 1932. Ace pairs. 1918 Henderson, Excelsior pre 1918 and later and Super X, Thor, or any fenders that someone would like.
They will need to be made before Nov this year so they can go into the container for shipping.
Email michael@vintagesteel.com.au
website www.vintagesteel.com.au
Please if you are going to the auction come and say hello.
Comment
-
-
No we cant go to Davenport . Its a big undertaking to get to the US with a large amount of fenders to display and sell . We will see how the Mecum auction week in Jan 2020 goes and then see what we can do the following year. Davenport was on our radar for a while and still is along with a couple of other events. Any suggestions of fenders to bring we would consider.
Comment
Comment