Announcement

Collapse
No announcement yet.

Dlx -124 cotten

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dlx -124 cotten

    Wanted to tell what a great job cotten did on my dlx-124 carb from my 1940-4 after installation it started right up and reguired no adjustment except for lowering the idle . I now have a L&L indian m8sa if anyone has intrest.
    thank again to cotten great job thanks chris

  • #2
    Originally posted by cscott View Post
    Wanted to tell what a great job cotten did on my dlx-124 carb from my 1940-4 after installation it started right up and reguired no adjustment except for lowering the idle . I now have a L&L indian m8sa if anyone has intrest.
    thank again to cotten great job thanks chris
    What is the correct finish for this carb?

    Thanks

    Mike

    Comment


    • #3
      Originally posted by JDHMike View Post
      What is the correct finish for this carb?

      Thanks

      Mike
      Both body and bowl were black, Mike!

      I use 'Supercoat' from https://sigmfg.com/

      The hardware was predominately cad, but a lot of the bowlnuts show up as the earlier nickel.

      ....Cotten
      Last edited by T. Cotten; 10-31-2019, 12:24 PM.
      AMCA #776
      Dumpster Diver's Motto: Seek,... and Ye Shall Find!

      Comment

      Working...
      X