Tweet
I am working on a 1915 Twin with the three speed transmission and Freewheel clutch. Does anyone have the thickness for the two fiber disks in the clutch? What is in my bike measure 0.342" thick. When the clutch disengages it is not as loose as another bike I looked at. It has more drag. After experimenting with adjustments, I suspect these replacements might be a bit thicker than the originals and could be the cause of this. Any sources for replacement (Competition's website shows not available).
NOTICE: New member email requirements now in effect. Longtime member having trouble logging in? Please review the requirements here.
Only registered users may post new messages on this forum. You must be an AMCA member to register. Click the register link on the top right to proceed.
If this is your first visit, be sure to check out the FAQ by clicking the link above. To start viewing messages, select the forum that you want to visit from the selection below.
If you are NOT an AMCA Member and would like to join Click Here
Comment