Tweet
on the front sprocket on and 1983 shovel the nut is right handed threads ?
-
-
shovel
yes they are. -
thanks thats what i thought its hard to get offComment
-
Use a hand held impact driver to remove it.Be sure to visit;
http://www.vintageamericanmotorcycles.com/main.php
Be sure to register at the site so you can see large images.
Also be sure to visit http://www.caimag.com/forum/Comment
-
Howdy sir,
If your machine is a solid mount 4 speed you can benefit immeasurably from installing a James Gaskets Super Nut. It contains a double lip seal on the face of the nut with a machined groove on the backside for an o-ring. This completely eliminates trans oil leaking from between the trans mainshaft and the sprocket driver sleeve, even on machines with the bushing knackered from running the final drive chain too tight. I run them on both my Shovels and even my 41 for those Knuck fans looking to stem the tide of oil laying under their primaries.Comment
-
he said front sprocket not intermedite.thank youComment
-
Are you calling the compensator the front sprocket??Comment
Comment