Announcement

Collapse
No announcement yet.

Servi-Car Box Frame

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Servi-Car Box Frame

    Can someone here give me some help. My buddy is restoring a Servi-Car and the box frame is missing half the tubing. This is what I need to fabricate. I need the inner dimentions of the frame. Thanks, Bob L
    AMCA #3149
    http://www.thegoodoldmotorcyclepartscompany.com

  • #2
    Bob L, I measured the support on a '61G. According to my parts book, they were the same from '39 to early '67. Front to rear it measures 24 1/4" and 21 1/8" left to right. We were careful not to measure at any brackets. These are inside the frame tube only. Thanks, Lloyd

    Comment


    • #3
      Thanks, Llyod. Time to weld. Bob L
      AMCA #3149
      http://www.thegoodoldmotorcyclepartscompany.com

      Comment


      • #4
        Originally posted by Lloyd View Post
        Bob L, I measured the support on a '61G. According to my parts book, they were the same from '39 to early '67. Front to rear it measures 24 1/4" and 21 1/8" left to right. We were careful not to measure at any brackets. These are inside the frame tube only. Thanks, Lloyd
        Sharp looking Servi you have there Lloyd any chance you could post a couple pictures? Thanks Chuck
        Chuck
        AMCA Member#1848

        Comment


        • #5
          Thanks Chuck. Added pic's to my album. Lloyd
          Last edited by Lloyd; 03-13-2011, 03:02 PM.

          Comment


          • #6
            Hi Bob,
            What year servi? Depending on the box, there is a different frame size from front to rear. I wouldn't fabricate yet untill you see what exactly the box is..There was alot of boxes for different years but only 2 sub-frames made, but with different front box mounts and 2 different front aprons. Len.
            p.s. as you probly already know this..Just trying to help...
            AMCA #765

            Comment


            • #7
              Thanks Len, After a phone call, he's going to make a custom box so it really doesn't matter. Thanks for taking the time to answer. Bob L
              AMCA #3149
              http://www.thegoodoldmotorcyclepartscompany.com

              Comment

              Working...
              X