1965 Kawasaki 125 B Motorcycle

[r.mac]

anybody tell me where to get seals and info on rebuilding the forks on these? thanks in advance

[dlm32]

r. mac

You probably won't have much luck with your local Kawi dealer. Way too old for them. The good news is there are a fair number of after market folks out there.

Japanese forks are measured by fork tube diameter in milimeters. Measure it on the fork tube just above the seal. Common sizes for early bikes ran from about 26-35mm.

I've had good luck getting them off eBay by fork tube size. The outer diameter of the seals seems to be somewhat standard.

Good luck!

[RSmith]

Vintage Kawasaki Parts

Northwest Vintage Cycle Parts has both
Kawasaki and Yamaha parts.

Their phone staff is extremely helpful.

http://www.nwvintagecycleparts.com/

Roger Smith #1718
AMCA Foundation Secretary

[r.mac]

thanks for the info!

[1941wld]

First thing I do when looking for parts is put the part number in the google search. Anyone on the net with this part for sale will pop-up. Check it out.