Announcement

Collapse
No announcement yet.

Cable clamps in the front end

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cable clamps in the front end

    Aaaannnd the last one for tonite!!!

    Please get a look to the cable clamp in my front end... Has been assembled properly? The hook goes outward but I saw it inwards sometimes and I am therefore confused...

    I have exactly a second one in the other side. Is this "correct" for 1947? If yes, which cables were expected to run through the left ones and which through the right one?

    Many thanks to all for the help!

    Kind regards.

    Chris.
    Last edited by Chris in Japan; 05-06-2009, 09:56 PM.

  • #2
    Your clamp is installed incorrectly.
    Be sure to visit;
    http://www.vintageamericanmotorcycles.com/main.php
    Be sure to register at the site so you can see large images.
    Also be sure to visit http://www.caimag.com/forum/

    Comment


    • #3
      Many thanks, Chris! Always crystal clear answers and most off all almost always excellent material behind... Really appreciate it!

      Do you know maybe which cable routes trough the left clamp and which through the right? I intend to replace the whole wiring which is today a mess and would love to respect this kind of things like the proper physical route of cables...

      Thanx again!

      Chris.

      Comment


      • #4
        Here is the other side. By the way. Notice the mounting bracket on these spotlamps. They are longer than the ones on your bike. The ones on your bike are 1949 and later.
        Be sure to visit;
        http://www.vintageamericanmotorcycles.com/main.php
        Be sure to register at the site so you can see large images.
        Also be sure to visit http://www.caimag.com/forum/

        Comment

        Working...
        X