Announcement

Collapse
No announcement yet.

tank transfers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • tank transfers

    could anyone tell me location for gas tank decals on 37 ul.paint supposed to be done this weekend.I have a set that i got with the bike few years ago and a set from old dude.first set way narrower than new set. not sure about location of pinstripes on tanks also and still confused about covering transfers. to clear or not to clear. thanks T-bone

  • #2
    Originals were not cleared. But then again they used single stage paint too.
    Be sure to visit;
    http://www.vintageamericanmotorcycles.com/main.php
    Be sure to register at the site so you can see large images.
    Also be sure to visit http://www.caimag.com/forum/

    Comment


    • #3
      hello chris the sheet metal on this bike is single stage and you can clear over it. you have to apply enough to sand and buff. im not a painter but the fella that is doing the job just did my 50fl ppg enamel looks like original. paint. ppg concept. adios T-bone

      Comment


      • #4
        Do you have the correct layout for the striping on the tanks and fenders?
        Be sure to visit;
        http://www.vintageamericanmotorcycles.com/main.php
        Be sure to register at the site so you can see large images.
        Also be sure to visit http://www.caimag.com/forum/

        Comment


        • #5
          i have layout for fenders but not the tanks T-bone

          Comment


          • #6
            I looked in palmer book and can see what you mean how do i go about getting correct ones thanks for the info.T-bone

            Comment


            • #7
              37 original paint tank

              have other detail shots if needed Photobucket

              Comment


              • #8
                Tim,
                If you faithfully reproduce decals for these years I'm very interested. Do you have some sort of website or catalog with what you make? Thanks,
                Eric
                :::::::::::::::::::::::::::::::::::::::
                Eric MATHIEU @ Beauty of Speed
                www.beautyofspeed.com
                :::::::::::::::::::::::::::::::::::::::

                Comment


                • #9
                  thanks alot. flthead other side of tanks would be great i think i know locations on fenders but pictures of original layout takes all the doubt out of it thanks again T-bone.

                  Comment


                  • #10
                    37 detail pics

                    t-bone set you a pm

                    Comment


                    • #11
                      Be sure to visit;
                      http://www.vintageamericanmotorcycles.com/main.php
                      Be sure to register at the site so you can see large images.
                      Also be sure to visit http://www.caimag.com/forum/

                      Comment


                      • #12
                        That's interesting.
                        Eric Smith
                        AMCA #886

                        Comment


                        • #13
                          Anyone else notice the differences in the black outlines on the decals between Chris' black and white vintage photo and the original paint tank posted by flthead? Both are 37 so i must agree with Eric... interesting.
                          Brian Howard AMCA#5866

                          Comment


                          • #14
                            thanks again everyone for the help

                            Comment


                            • #15
                              on 36 and 37 the end of the decal should be closed where it points toward the front of the bike
                              Tim[/QUOTE]

                              Tim.
                              It is my experience from looking at photos and examples of original paint bikes that, Most 1936/1937 Harley-Davidson Knuckleheads VLs and Us had the decal as shown in the factory photo that Chris posted.

                              Pete Reeves 860

                              Comment

                              Working...
                              X